60
Making
Calls/Receiving
Calls
Press
or
to take the call.
●
You can set “Illumination in talk” so that the Call/Charging indicator flickers during a call.
●
When “Answer setting” is set to “Any key answer”, the call is placed on hold if you take the call by
pressing
with the FOMA phone closed. If you have set “Fold setting” to “No tone” or “End the call”,
the other party hears nothing, and if you have set “Fold setting” to “Tone on”, the call hold tone is played
back. You can start talking by opening the FOMA phone. “Holding” appears on the Private window.
●
If you close the FOMA phone during a call, the FOMA phone works in accordance with “Fold setting”.
(See page 62)
2
■
One-push answer
When a voice call comes in with the FOMA phone closed, you can answer the call just by pressing the one-push open button and
opening the FOMA phone.
●
You need to set “Phone” of “Open phone” to “Answer” in advance. (See page 62)
●
You can answer the call also by opening the FOMA phone manually without using the one-push open button.
■
Any Key Answer
Voice calls can be taken by pressing any key of
through
,
,
,
,
(top, bottom, left, or right of the
Command Navigation key), and
in addition to
or
.
●
When “Answer setting” is set to “Quick silent”, you can stop only the ring tone by pressing a certain key.
Press
to end the call after talking.
3
When you receive a call, the ring tone sounds and the Call/Charging
indicator and Command Navigation key flicker.
●
You can use “Illumination” to set an illumination pattern for the Call/Charging indicator.
●
To vibrate the phone for incoming calls, set “Phone” of “Vibrator” to other than “OFF”.
●
While “Manner mode” or “Super silent” is set, the ring tone does not sound. (See pages 122 and 123)
●
While receiving a call, information is displayed on the Private window and the dot-area data for the
incoming call is displayed.
●
“
” is displayed at the upper right of the phone number for incoming international calls.
1
Receiving a Call
●
During ringing, you can activate Manner Mode by pressing
or
; “Record message” will be activated so that the caller’s
message can be recorded. You can still take the call during recording by pressing
or
.
(The message until you press
or
will be recorded. Also, Manner Mode will remain activated after the call ends.)
●
You might hear beeps (ring tone in call) during a call.
If you have signed up for any of Voice Mail Service, Call Waiting Service, or Call Forwarding Service and set “Arrival call act” to
“Answer”, the beeps (ring tone in call) will sound for another incoming call, enabling you to do the following operations:
Voice Mail Service ·····················Transfer the call to the Voice Mail Service Center. (See page 456)
Call Waiting Service ··················Put your current call on hold and take the incoming call. (See page 457)
Call Forwarding Service ············Transfer the call to the registered forwarding destination. (See page 459)
●
During Drive Mode, the ring tone does not sound and the Call/Charging indicator does not flicker for incoming calls. Incoming calls
are recorded as missed calls in Received Call Record.
●
You cannot receive calls from the phone numbers set for “Call rejection” in “Restrictions”. Also, you cannot receive calls from the
phone numbers except those set for “Call acceptation”.
●
By setting “Ring start time” of “Ringing time”, you can specify the time until ringing starts for when a call comes in from the phone
number not stored in the Phonebook.
●
You can set “Reject unknown” not to accept calls from the phone numbers not stored in the Phonebook.
Information
