![Docomo FOMA P901iS Manual Download Page 478](http://html1.mh-extra.com/html/docomo/foma-p901is/foma-p901is_manual_2515006478.webp)
To connect the FOMA phone to your personal computer
and perform packet transmission or 64K data
transmission, you need to define settings for the
transmission.
Using the FOMA PC setup software, you can easily set
up dial-up, W-TCP, and access point name (APN).
Transmission Setting by FOMA PC
Setup Software
476
Data
Transmission
To connect the FOMA phone to a personal computer
and perform the packet transmission or 64K data
transmission, you need to define various settings
related to the transmission. Using the FOMA PC setup
software, you can easily carry out the settings below. If
required, you can set the packet transmission and 64K
data transmission without using the FOMA PC setup
software. (See pages 487 and 499)
The “FOMA PC setup software” is applicable to all
FOMA phones that support data transmission.
FOMA PC Setup Software
Installing FOMA PC Setup Software
■
Easy setting
You can “create dial-up setting for FOMA data transmission”
according to the guide, and also automatically carry out “W-TCP
setup” and so on.
■
W-TCP setup
Before using “FOMA packet transmission”, optimize transmission
settings in your personal computer.
To maximize the transmission performance, you need to optimize
transmission settings using W-TCP setup.
■
Access point name (APN) setting
You can set an access point name (APN) required for packet
transmission.
The FOMA packet transmission does not use an ordinary phone
number as an access point unlike the 64K data transmission.
You need to register an access point name (APN) in the FOMA
phone in advance, and specify the registration number (cid) in the
access point number field for connection.
By the default, “mopera.ne.jp”, the access point name (APN) of
“mopera”, is registered in cid
※
1, and “mopera.net” that of
“mopera U”, is registered in cid
※
3.
To connect to another service provider or in-house LAN, however,
you need to set the access point name (APN).
※
“cid” is the abbreviation of “Context Identifier”, the number for
storing the packet transmission access point (APN) to the FOMA
phone.
STEP1
Install Software
Install the “FOMA PC setup software”.
See this page for installation.
If the old-version “FOMA PC setup software” is already installed,
uninstall it before installing “FOMA PC setup software”. If the
old-version “FOMA PC setup software” is installed, you cannot
install the “FOMA PC setup software”.
The “FOMA PC setup software” is applicable to all FOMA phones
that support data transmission.
STEP2
Prepare for Setup
Prepare for setup.
Before setup, confirm that the FOMA phone is connected to your
personal computer and normally recognized by the personal
computer. See page 471 for connection of the FOMA USB Cable
(option). If the FOMA phone is not normally recognized by the
personal computer, you cannot perform settings and transmission.
See page 474 for confirming whether the FOMA phone is normally
recognized by the personal computer. See pages 472 to 475 for
how to install the P901iS transmission setup files.
STEP4
Connection
Connect to the Internet.
STEP3
Setting Operation
Carry out the appropriate setting for the
transmission you use.
See page 479 for setting the packet transmission from “Easy Setting”.
When using “mopera U” or “mopera” as an access point ······page 479
When using a provider other than “mopera U” or “mopera” as
an access point ······································································page 480
See page 481 for setting the 64K data transmission from “Easy Setting”.
When using “mopera U” or “mopera” as an access point ······page 481
When using a provider other than “mopera U” or “mopera” as
an access point ······································································page 482
See page 485 for optimizing the packet transmission performance using
“W-TCP Setup”.
See page 486 for setting “access point name (APN)”.
●
When the old-version of FOMA PC setup software (version 1.00,
hereafter referred to FOMA PC setup software) is installed, uninstall it
before installing this “FOMA PC setup software” (version 2.00). See
page 478 for how to check the version information.
Information