115
Tone/Display/Light
Setting
Select a type of ring tone
Melody ·························Selects a melody.
i
motion ······················Selects an i-motion movie.
Voice announce ···········Selects a recorded sound in “Voice announce”.
Selects “Voice announce 1” or “Voice announce 2”, and press
. The setting is completed.
OFF······························The ring tone does not sound. The setting is completed.
3
●
The priority order of ring tones is; “Setting by phone number or mail address”
→
“Setting by group”
→
“Select ring tone”.
●
The ring tone or images set at purchase might be played back or displayed for incoming calls or messages, depending on the
combination of this function and “Display setting”.
●
When you set an i-motion movie containing images and sound for a ring tone (Chaku-motion), it is played back taking priority over
“Display setting”. However, if you set an i-motion movie containing only voice (i-motion movie without image, such as a singer’s voice)
for the ring tone, the image set by “Display setting” is displayed.
●
If you set the i-motion movie containing video and sound for “Select calling disp.”, the i-motion movie is played back taking priority
over this function for incoming calls. However, the ring tone selected for this function is played back for incoming calls when the
i-motion movie with video only is set for “Select calling disp.”.
●
You cannot set i-motion movies containing only video for ring tones. Additionally, you cannot set some i-motion movies for the ring tone.
●
For the incoming call without the Caller ID, you can use “Call setting w/o ID” to set the ring tone.
●
When different types of mail — i-mode mail, SMS messages, chat mail, or Messages R/F — are received at the same time, the
priority order of ring tone is; “Chat mail”
→
“i-mode mail/SMS”
→
“MessageR (Request)”
→
“MessageF (Free)”.
If you receive the same type of mail simultaneously, the ring tone corresponding to the mail you have received last works.
●
Press
(
) in step 2 and you can check the ring tone or images actually played back or displayed.
●
For the melody downloaded from a site or attached to mail, or the melody prohibited to attach to mail or output from the FOMA phone,
a playing part may be specified in advance. When the play-part-specified-melody is set for the ring tone, only the specified part is
played back.
Information
Select a folder
Select a ring tone or an i-motion movie
●
See pages 346 and 385 for melody folders and lists.
●
See pages 346 and 367 for i-motion folders and lists.
4
You can set a ring tone for each phone number or mail address stored in the FOMA phone’s Phonebook.
Set by Phone Number or Mail Address
Detailed Phonebook display
(
) Utilities
Ring tone ·····················Sets a ring tone or i-motion movie for voice calls and video-phone calls from the specified phone number.
Mail ring tone ···············Sets a ring tone or i-motion movie for i-mode mail from the specified mail address and SMS messages
from the specified phone number.
Go to step 3 on this page.
The set item is indicated by “
★
”.
●
See page 101 for how to search the Phonebook.
●
From the detailed display, press
to bring up the phone number or mail address for which you set Utilities.
●
To release the ring tone for the phone number or mail address, perform the same operation.
1
●
You cannot set the ring tone for the Phonebook entries stored in “Secret mode”, “Secret only mode”, and in the UIM.
●
Note that the “Ring tone” setting of “Utilities” is valid only when the Caller ID is provided. It is advisable to activate “Caller ID request”
in advance.
●
Note that this function is released if you change the set phone number or mail address.
●
To change the set ring tone, release the current setting and proceed.
●
When you receive the i-mode mail from the address “phone [email protected]”, the mail ring tone set for the phone number in
the Phonebook will sound.
●
Use “Utilities” to check which phone number or mail address in the Phonebook entry is set, or to release the setting.
Information
