175
Camera
Use Zoom
You can display the image through the camera in “Wide” or “Tele”.
The maximum magnification for each size is as follows:
Changing Settings for Shooting Images
You can set a camera when shooting images.
■
Outside camera
■
Inside camera
●
The image quality may slightly change when you select “Wide” or “Tele”.
●
“Tele” is released in the following cases:
･
When you press
to end the camera
･
When size is changed
･
When camera mode is switched
●
See page 178 for “Storage setting”.
Information
Finder display Use
to adjust the magnification
Each time you press
(wide) or
(tele), zooming varies.
If you keep pressing
(wide) or
(tele), zooming varies consecutively.
1
For “Wide (W)”
For “Tele (T)”
●
You cannot zoom in or out the image for CIF/Stand-by in Photo
Mode/Continuous Mode or QVGA in Movie Mode.
●
You cannot zoom in or out the image for UXGA/SXGA in Photo Mode.
※
1: When “Storage setting” is set to “Super fine”.
※
2: When “Storage setting” is set to “Normal (Phone)”, “Fine
mode”, “Prefer motion”, “Normal (miniSD)”, or “Fine”.
※
3: When “Storage setting” is set to “Long dur. mode”.
The maximum
Camera mode
Size
magnifications
(Approx.)
VGA (640 x 480)
2.5 times
CIF (352 x 288)
4.1 times
Photo
Stand-by (240 x 320)
3.7 times
QCIF (176 x 144)
8.3 times
Sub-QCIF (128 x 96)
12.5 times
CIF (352 x 288)
1.3 times
Continuous
Stand-by (240 x 320)
1.2 times
QCIF (176 x 144)
2.7 times
Sub-QCIF (128 x 96)
4.1 times
QVGA (320 x 240)
※
1
1.6 times
Movie
QCIF (176 x 144)
※
2
2.7 times
Sub-QCIF (128 x 96)
※
3
4.1 times
The maximum
Camera mode
Size
magnifications
(Approx.)
Photo/
QCIF (176 x 144)
2.0 times
Continuous
Sub-QCIF (128 x 96)
2.7 times
Movie
QCIF (176 x 144)
※
2
2.0 times
Sub-QCIF (128 x 96)
※
3
2.7 times
<Set as stand-by>
●
If you delete the moving image file set for the Stand-by display, the Stand-by display is also cleared.
●
Some moving images might not be displayed correctly.
●
See page 372 for playback of the moving image file set for the Stand-by display.
Information
