343
Mobile
Wallet
i-mode
FeliCa
Enter the Terminal Security Code
IC Card Lock is released.
●
See page 146 for the Terminal Security Code.
2
<Face Reader Setting>
Setting at purchase
Not recorded
Using Face Reader
Store
To use Face Reader, store three or more face data items. You can store up to 10 face data items.
Lock/Security Face reader setting
Enter the Terminal Security Code
●
See page 146 for the Terminal Security Code.
1
You can store the face data in Face Reader and use the face data for certifying IC Card Lock.
●
The dirty camera might result in erroneous operation. Wipe the lens with a soft cloth to clean the dirt off.
●
In environment where the face is exposed to strong light and the brightness significantly differs depending on the region of the face, the
face will not be detected easily. In this case, storing might become difficult or the certificate rate might be lowered. Adjust so that the
face is exposed to even light.
●
The face might not be recognized normally when its entire part is exposed to the light and becomes white.
●
Storing the face might become difficult or the certificate rate (the rate of correct identification) might be lowered when the face conditions
are as described below.
・
When the features of the face (eyes, mouth, nose, and eyebrows) are not visible covered by hair, glasses, or mask.
・
When the brightness significantly differs depending on the region of the face such as when under the light in a dark place.
The certificate rate might rise by reacting in accordance with the face conditions such as by raising the hair so that the eyes, nose,
mouth, and eyebrows are clearly visible (taking the glasses and mask off) or moving to a place where the face is exposed to even light.
The certificate rate rises also by storing the face data additionally.
●
The face certificate technology does not completely guarantee that you are certified as yourself. Accordingly, we are not at all
responsible for damages resulting from the use of this product by a third party or when the damages are caused by what you could not
use the function because of wrong certification by Face Reader.
■
If you failed to be certified:
If you failed to be certified, that reason is displayed.
When additional storing of the face data is possible, press
to bring up the confirmation display for asking whether to
store additional face data. Select “YES” and press
to bring up the display for entering the Terminal Security Code.
Enter the Terminal Security Code, and press
; then you can store additional face data. To cancel this procedure, select
“NO” and press
. When additional storing of the face data is not possible, press
to bring up the Reading Face
Data display. Try to be certified using Face Reader again.
●
When 10 face data items are stored and a new data item is added, the oldest data item is written over.
Match the face to the guide frame and press
.
Face to the front, align the center of the face with the “+” mark, and locate the face
within the guide frame. You can decrease failure to certify the face data, which results
from the difference in the position of the face at storing and certifying the data.
●
Perform the certification with the same facial expression as when you stored the face data.
1
<Reading Face Data display>
Guide frame
Releasing IC Card Lock in Double Security Mode
(Example for matching the face to the guide frame)
