158
Safety
Settings
Function menu
Check settings
Release
Operations
Go to step 2 on page 157.
YES
●
To cancel, select “NO” and press
.
<Example>
If you release the settings from the display in step 1 on page 157, all the Phonebook entries set with
“Restrict dialing” are released.
●
You cannot check or release while another function is working.
Information
Restrictions display
(
) Do the following operations.
1
Function Menu of the Restrictions Display
<Call Setting w/o ID>
Setting Response to Incoming Calls without Caller ID
You can select whether to receive (accept) or not to receive (reject)
the call depending on the reason for No Caller ID. There are three
reasons; “Not supported”, “Payphone”, and “User unset”.
Lock/Security Call setting w/o ID Enter the Terminal Security Code
Not supported ··············Calls from the other party who cannot notify his/her phone number such as the calls from overseas or
from ordinary phones via call forwarding services.
(However, the Caller ID might be notified depending on the telephone companies the calls go through.)
Payphone·····················Calls from payphones, etc.
User unset ···················When the caller has set the Caller ID not to notify.
●
See page 146 for the Terminal Security Code.
1
Setting at purchase
Not supported······Accept : Same as ring tone
Payphone ············Accept : Same as ring tone
User unset···········Accept : Same as ring tone
Accept or Reject
●
If you select “Accept”, go to step 3 on page 115 to select a ring tone or i-motion movie. If you select “Same as ring tone”, the
ring tone will be the one selected in “Phone” of “Select ring tone”. If you do not change the ring tone according to whether the
Caller ID is notified or not, select “Same as ring tone”.
2
●
If you select “Reject”, the ring tone does not sound even if a call comes in, the call is stored into “Received calls” as a “Missed call”
and the icon of “Missed call” appears on the Stand-by display. Also, the caller hears a busy tone even if you have set Voice Mail
Service or Call Forwarding Service to “Activate”. However, if you set the ringing time for Voice Mail Service or Call Forwarding
Service to 0 seconds, or when the FOMA phone is out of the service area, or when the power is turned off, the busy tone will not be
played, activating Voice Mail Service or Call Forwarding Service. Note that in this case the record is not stored in “Received calls”,
and the “Missed call” icon does not appear on the Stand-by display.
●
You can receive SMS messages or i-mode mail regardless of this setting.
Information
