298
●
During PIM Lock, you cannot display Mail members.
●
If you store the same mail address in a Mail member and try to send a message, the message “Same address is entered Send?”
appears. Select “YES” and press
; the duplicated addresses are deleted and the message is then sent. To cancel, select “NO”
and press
.
Information
Checking Stored Mail Address
Mail member Select a Mail member
Select a mail address
●
You can bring up the edit display by pressing
(
). Go to step 3 on this page.
1
<Mail Member Address
Confirmation display>
Enter a mail address
Repeat steps 2 and 3 to store multiple mail addresses.
●
You can enter up to 50 half-pitch characters.
●
See page 510 for how to enter characters.
3
<Mail Member Address List>
Select <Not stored>
(
)
●
If you edit a stored mail address, select the mail address.
2
Function menu
Compose message
Edit member name
Reset member name
Operations
You can send i-mode mail to a Mail member.
Go to step 3 on page 245.
Enter the name of the Mail member
●
You can enter up to 10 full-pitch or 20 half-pitch characters.
●
See page 510 for how to enter characters.
You can reset the name of Mail member to the default.
YES
●
To cancel, select “NO” and press
.
Mail Member List
(
) Do the following operations.
1
Function Menu of the Mail Member List
<Mail Member List>
