344
Mobile
Wallet
i-mode
FeliCa
Function menu
Brightness
Help
Operations
−
2···················Dark
−
1···················Slightly dark
±
0···················Standard (Setting at purchase)
＋
1···················Slightly bright
＋
2···················Bright
●
You can adjust brightness also by pressing
from the Reading Face Data display.
You can check the caution for shooting.
●
You can bring up Help also by pressing
from the Reading Face Data display.
●
After checking, press
.
Reading Face Data display
(
) Do the following operations.
1
Function Menu of the Reading Face Data Display
Reset
You can reset all the face data stored in Face Reader.
Lock/Security Face reader setting
Enter the Terminal Security Code
●
See page 146 for the Terminal Security Code.
1
Reset YES
●
To cancel, select “NO” and press
.
2
●
You cannot execute Reset during IC Card Lock.
●
When you reset the face data, “Security mode” of “IC card lock settings” is set to “Normal”.
Information
Store OK
Face to the front, align the center of the face with the “+” mark, and locate the face
within the guide frame. You can decrease the failure to certify the face data, which
results from the difference in the position of the face at storing and certifying the data.
●
The number of face data items is displayed by the bar on the Reading Face Data
display.
2
<Reading Face Data display>
Press .
Face data is shot.
●
When the face data could not be recognized, press
to return to step 2.
3
Press .
The face data you have shot is stored. Repeat steps 2 through 4 to store three or more face data items.
●
When the third face data is stored, the message appears telling that Face Reader can be more easily used by adding face
data. Press
to return to step 2.
●
To clear the shot face data, press
. Select “YES” from the confirmation display for asking whether to clear the face data
and press
; then the face data is cleared. To cancel this procedure, select “NO” and press
.
●
If you try to store the face data in the same environment, you might not be successful. Change the direction of the face or the
place for shooting.
4
Guide frame
●
At shooting, the Call/Charging indicator flickers in red and the shutter tone sounds regardless of the Manner Mode setting. The sound level is
fixed at Level 6, which cannot be changed. However, the shutter tone does not sound during playback with SD-Audio or in pause state.
Information
Stored number bar
(Example for matching the face to the guide frame)
