422
Other
Useful
Functions
Press
to answer the call.
i-mode or packet transmission stays connected.
●
You cannot receive a video-phone call.
●
To switch the displays, press and hold
for at least one second; or press
and switch from
TASK MENU. (See pages 423 and 424)
●
To return to the display for i-mode or packet transmission without answering the call, press and hold
for at least one second. Press and hold
for at least one second again to return to the Call
Receiving display.
The caller hears not a message but a ringing tone.
2
■
If a call comes in during a call
If you have subscribed to Call Waiting Service, the ring tone sounds and the message to the effect that you can end the
call/transmission to answer the incoming call is displayed when a call comes in during a call or 64K data transmission. You can
transfer the incoming call to the Voice Mail Center or forward to the forwarding destination to resume the current call, or end the
current call to answer the incoming call.
To continue the current call:
1. Press
or
.
●
If another voice call comes in during a voice call, the message to the effect that you can answer the call is not displayed.
Perform the operation in step 2 from the Call Receiving display.
2. Press
(
).
Call rejection ········You can reject an incoming call and resume the current call.
Call forwarding ·····You can forward a call to the forwarding destination and resume the current call.
Voice mail ············You can connect an incoming call to the Voice Mail Center and resume the current call.
To answer an incoming call:
・
When a video-phone call comes in during a video-phone call
When a voice phone call comes in during a voice call
When 64K data transmission is received during 64K data transmission
1. Press
or
.
●
If another voice call comes in during a voice call, the message to the effect that you can answer the call is not displayed.
Perform the operation in step 2 from the Call Receiving display.
2. Press
.
The current call ends and the Call Receiving display appears. Then, you can answer the incoming call.
・
Other than combinations above:
1.
or
Select the communication to end
●
To end the video-phone call, select “Connecting V-phone” , to end the voice call, select “Talking”, and to end the 64K data
transmission, select “Connected data”, respectively.
●
You can select the communication to end also by pressing and holding
for at least one second to switch the tasks.
2. Press
.
The current call ends and the Call Receiving display appears. Then, you can answer the incoming call.
●
Incoming calls are rejected when a video-phone is connected, remote-control is activated, during call hold, or while Record
Message is working. The “Missed call” icon will be displayed when the current call ends, and it will be stored in the Received Call
Record. (The “Missed call” icon might not appear and the received call record might not be kept depending on the contracts and
setting for Voice Mail, Call Waiting, and Call Forwarding Services.)
●
If a call comes in during a video-phone call, the moving image, i-motion movie or Flash movie set as the image for incoming calls
is not displayed.
●
If a call comes in during a video-phone call, a “Pre-installed” substitutive image is sent to the other party of the current call.
●
If a call comes in during a video-phone call, the vibrator does not work.
Information
