182
Camera
You can store up to 5 scanned codes.
You can scan up to 16 divided QR codes.
Bar code reader Scan code
●
You can bring up the display on the right also by selecting
from the Shortcut menu and pressing
.
●
You can bring up the display on the right also by selecting “Bar code reader” of “CHG camera-mode”
from the Function menu and pressing
.
●
When five codes have already been stored, the confirmation display appears asking whether to
overwrite the oldest code. To overwrite, select “YES” and press
.
To cancel, select “NO” and press
.
1
Switch to the close-up mode and fit the code to be scanned to the
guide frame and display the code.
●
If you can select “Bar code reader” from the Function menu in the Character Entry (Edit) display, you
can bring up the display on the right also by selecting “Bar code reader” and pressing
.
●
Press (
/
) to set the photo light to “ON” or “OFF”.
●
Press
to zoom standard and press
to zoom wide.
2
<Bar Code Reader Selection display>
Scanning a Code
At Bar Code Reader start-up
Photo light ·······OFF
Zoom ···············Wide
<Scanning Code display>
■
When scanning with the bar code reader:
• Slide the close-up lever to “
” and start scanning. (See
page 176)
• Scan codes with the camera about 10 cm away from them.
However, slowly bring the camera close to small codes so
that those are shot large within the frame.
• Scan so that the camera is in parallel with the codes.
• Scan so that the codes are inside the guide frame.
• After scanning, slide the close-up lever back to “
”.
■
JAN Code
JAN Code is a bar code that denotes numerals with the vertical bars of a different width.
You can scan 8-digit (JAN8) and 13-digit (JAN13) JAN codes.
●
“4942857112597” is displayed when the FOMA phone is used for scanning the bar code on the left.
■
QR Code
QR Code is one of the 2-dimensional codes that denotes data in the vertical and horizontal
directions. Alphanumeric, kanji, katakana, and pictographs are displayed as characters.
Some QR codes have image or melody information.
●
“
株式会社NTTドコモ
” is displayed when the FOMA phone is used for scanning the QR code on the left.
<Bar Code Reader>
Using Bar Code Reader
You can use the outside camera to scan JAN codes and QR codes and store them as data. From the scanned
data, you can make calls, compose i-mode messages, and access Internet web pages, and so on.
Guide frame
