137
Tone/Display/Light
Setting
Use
to adjust the color
Use
to select a color and
to change the color tone.
2
Incoming call Illumination Adjust color Adjust color tone
Select a color
●
You cannot select “Gradation”.
1
Adjust Color Tone
●
You cannot set the illumination for “Group 00” or for groups in the UIM.
●
Note that “Illumination” of “Utilities” is valid only when the Caller ID is provided. It is advisable to activate “Caller ID request” in
advance.
●
To change the set illumination, release the current setting and proceed.
●
If you store the same phone number or mail address in multiple groups, the illumination set for the group of the phone number or mail
address which is accessed initially in the column-search order has priority.
●
You can set this function for either the group in which secret and ordinary Phonebook entries are stored together or the group in
which only secret entries are stored; however this function is disabled if you receive a call or mail from the secret entry.
●
Use “Utilities” to check which group is set, or to release the setting.
Information
You can set an illumination pattern for illumination and the Command Navigation key.
Incoming call Illumination Set pattern
Standard ······················Flickering repeats “ON for about 0.5 seconds” and “OFF for about 0.5 seconds”.
Melody linkage·············Flickers in accordance with a melody.
1
Set Patterns
Setting at purchase
Standard
●
Even if you select “Melody linkage”, the illumination flickers in “Standard” when an illumination pattern that links to melody is not
stored in the ring tone.
●
If you have set an i-motion movie for the ring tone in “Select ring tone”, the illumination flickers in “Standard”.
Information
Enter a name
●
You can enter up to 10 full-pitch or 20 half-pitch characters.
●
See page 510 for how to enter characters.
2
Incoming call Illumination Adjust color Edit color name
Select a color
●
You cannot select “Gradation”.
1
Edit Color Name
