146
Safety
Settings
PIN1 Code/PIN2 Code
You can set the two security codes, namely the PIN1 code and PIN2 code for the UIM.
The default for these security codes is “0000”, but you can change these codes as you desire.
The PIN1 code is the four- to eight-digit code for checking the user each time the UIM is inserted into the
FOMA phone or each time the FOMA phone is turned on, so that you can prevent the third party from
using your UIM. By entering the PIN1 code, you can make or take calls, or use functions in the FOMA
phone.
The PIN2 code is the four- to eight-digit code for using the user certificate or applying to the issue of it
and executing Reset Call Charge.
●
If you purchase a new FOMA phone and use the existing UIM with the new FOMA phone, use the PIN1 code and PIN2 code you have
set previously. If you have not changed the PIN1 code and PIN2 code, those are “0000”.
Terminal Security Code
For some functions of the FOMA phone, you need to enter your password. In addition to the Terminal
Security Code for operating respective mobile phone functions, the Network Security Code to use network
services, and i-mode password are available. These passwords help you utilize your FOMA phone.
Passwords
When the display for entering the Terminal Security Code appears, enter your four- to
eight-digit code and press
.
●
“_” is displayed instead of the entered numbers.
●
If you have entered wrong numbers or nothing for about 15 seconds, a warning tone sounds and a warning
message is displayed; then the display prior to the entering the Terminal Security Code returns. Check the correct
numbers and retry entering numbers.
The Network Security Code is a four-digit number that is determined at the time of contract, which is
used for using network services or for procedures on the DoCoMo e-site.
●
If you do not remember the Network Security Code, consult “DoCoMo Information Center” described on the back
page of this manual. We at DoCoMo shop counters check documents such as driver’s license to see if you are
really yourself and then go to the procedure for resuming your Network Security Code. If you have “User ID” and
“Password”, you can also use a personal computer to take proceedings from the e-site.
※
See the back page of this manual for “DoCoMo e-site”.
Network Security Code
The Terminal Security Code has been set to “0000” at purchase but you can change it as you desire.
●
Note that if you do not remember the Terminal Security Code, you need to bring the FOMA phone
※
, UIM, and an
identification card such as the driver’s license to a DoCoMo shop counter.
※
Make sure that you (the subscriber) bring the FOMA phone by yourself to a DoCoMo shop counter. Otherwise, the
Terminal Security Code might not be resumed.
When the PIN1 Code or PIN2 Code Entry display appears, enter the four- to eight-digit
PIN1 code/PIN2 code and press
.
●
If you enter the Terminal Security Code for the first time, enter “0000”.
●
The entered PIN1 code or PIN2 code is displayed as “_”.
●
If you enter the wrong PIN1 code or PIN2 code three times in succession, further entry will be locked.
(“Rest” appears on the display to notify you of possible entering frequency.)
Enter the correct PIN1 code or PIN2 code; “Rest” will return to three times.
See page 149 for how to release the PIN lock.
For PIN1 code
