317
■
To reset the user setting
1. In step 1, select “Reset” and press
.
2. Enter the Terminal Security Code and press
.
3. Select “YES” and press
.
●
To cancel, select “NO” and press
.
●
After resetting, the SMS destination host Center will be “DoCoMo”.
Information
You can set the address and “Type of Number” for the SMS Center.
This setting is for getting any service other than SMS Service you currently use.
Connection setting SMS center selection User setting
Enter an address
●
You can enter up to 20 half-pitch characters.
●
See page 510 for how to enter characters.
1
※
Normally, you do not need to change this setting.
SMS Center Selection
Setting at purchase
DoCoMo
International or Unknown
●
If “
:
” or “
＃
” is included in the entered address, you cannot set it for “International”.
2
SMS Input Character
Setting at purchase
Japanese (70char.)
●
You cannot set this function if the text has been entered.
Information
You can set the characters you can enter into the text of SMS messages.
You can set so that you can enter only half-pitch alphanumeric and half-pitch symbols.
Mail settings SMS input character
Japanese (70char.)······You can enter full-pitch and half-pitch characters. You cannot enter pictographs except “
” and “
”
(see pages 512 and 513). You can enter up to 70 characters for the text.
English (160char.)········You can enter only half-pitch alphanumeric and half-pitch symbols. You can enter up to 160 characters
for the text.
●
While you are composing an SMS message, you can press
(
) and select “SMS input char.”.
In this case, “Japanese (70char.)” is displayed as “Japanese” and “English (160char.)” is displayed as “English”.
1
