Setting Scanning Function <Scan Function>
573
Appendix
<Scanning Function>
Protecting the FOMA Phone from Data Causing Trouble
Checking reservation
Select “Software update” from the setting menu and enter the Terminal Security Code;
then you can confirm the reserved time.
You can change or cancel the reserved date and time from the display for checking reservation. To change, select
“Change”. To cancel, select “Cancel”.
Ending software update
If you select “NO” or “Cancel” from each display, the display for ending the operation appears.
Select “YES” and press
; then the software update is completed and the Stand-by display returns.
To return to the previous display, select “NO” and press
.
Set at purchase
ON
Lock/Security Scanning function Scan function
1
ON YES
●
To cancel, select “NO” and press
.
●
When the scan function is set, an alert is shown by five levels if data that might cause trouble is detected. (See page 574)
2
●
You cannot set this function while another function is working.
Information
●
If the battery level points “
” during operation, the software download or rewriting is not done and the operation is finished.
Information
If you set the scan function to “ON”, data or program is automatically checked when you try to run it.
Regarding data and programs downloaded or acquired from sites or i-mode mail messages to the FOMA
phone, you can detect data that might cause trouble, can delete it, and can stop launching an application
program.
●
Use the pattern data for checking. Update the pattern data, because it is updated each time new trouble is
found. (See page 574)
●
The scan function is for filtering out the data that causes troubles to mobile phones at the time of browsing web
pages or receiving messages. Note that this function works only when the pattern data for each trouble has
been downloaded to your mobile phone and when the pattern data for each trouble is found.
●
The data contained in the pattern data vary depending on the mobile phone model. Therefore, note that we
may stop distributing the pattern data to mobile phones that have been on the market for three years or more.
First of all, update the pattern data to make it the latest.
