66
Making
Calls/Receiving
Calls
Use
to adjust the volume
Step ·····························The ring tone is silent for about three seconds, and then the volume steps up
every three seconds, from Level 1 through Level 6.
Levels 1 to 6 ················Level 1 is the weakest volume and Level 6 the loudest.
Silent····························The ring tone does not sound.
●
Following icons are displayed while the ring volume is set to “Silent”:
: The ring volume for voice calls or video-phone calls is “Silent”.
: The ring volume for mail, chat mail or Messages R/F is “Silent”.
: The ring volume for voice calls, video-phone calls, mail, chat mail, and Messages R/F is “Silent”.
2
●
You cannot adjust the ring volume during ringing.
●
Even if the ring volume for mail, chat mail, or Messages (R/F) is set to any other than “Silent”, “
” is displayed and the ring tone
does not sound while “Mail/Msg. ring time” (see page 121) is set to “OFF”.
Information
During ringing
The FOMA phone makes three rapid beeps for confirmation and the incoming call is put on hold.
●
The confirmation tone does not sound when “Phone” of “Ring volume” is “Silent” or while Manner Mode
is activated.
●
The other party hears the hold tone set for “On hold tone” of “Call response setting”.
For video-phone calls, the still image selected in “On hold” of “Select image” is displayed.
1
Press
to release hold and answer the call.
●
If a voice call is on hold, you can also press
to release hold.
If “Answer setting” is set to “Any key answer”, you can release hold by pressing any key of
through
,
,
, , , , , or .
●
If a video-phone is on hold, the image through your camera is sent to the other party by pressing
to release hold. If you
press
or
to release hold, the substitutive image is sent.
2
<On Hold>
Putting an Incoming Call on Hold
●
The caller is charged for the call even during answer-hold.
●
If you press
during answer-hold, the call will be disconnected.
●
If the caller on hold hangs up, the call will be disconnected.
●
If you have set “Open phone” to “Answer”, you cannot put an incoming call on hold while the FOMA phone is closed.
Information
Press
or
to release hold and answer the call.
●
If a video-phone is on hold, the image through your camera is sent to the other party by pressing
to release hold.
If you press
or
to release hold, the substitutive image is sent.
●
If you have set “Fold setting” to “Tone on” and put the call on hold by closing the FOMA phone, open the FOMA phone or
connect the Flat-plug Earphone/Microphone Set with Switch (option) to take the call.
If you connect the Flat-plug Earphone/Microphone Set with Switch to take the video-phone call, the substitutive image is sent
to the other party.
2
During a call
●
The other party hears the hold tone set for “Holding tone” of “Call response setting”.
For video-phone calls, the still image set for “Holding” of “Select image” is displayed.
●
You can put the call on hold by closing the FOMA phone during the call if you have set “Fold setting” to “Tone on”.
1
<Holding>
Putting a Call on Hold during a Call
