78
Making/Receiving
Video-phone
Calls
When you answer a video-phone call, your image and the caller’s image are displayed.
You can answer video-phone calls without sending the image through your camera to the caller’s display
(substitutive image answering).
When you receive a video-phone call, “Incoming V.phone” is
displayed, the ring tone sounds and the Call/Charging indicator and
Command Navigation key flicker.
●
You can use “Illumination” to set an illumination pattern for the Call/Charging indicator.
●
To vibrate the phone for incoming calls, set “Video-phone” of “Vibrator” to other than “OFF”.
●
While “Manner mode” or “Super silent” is set, the ring tone does not sound. (See pages 122 and 123)
●
While receiving a call, information is displayed on the Private window and the dot-area data for the
incoming call is displayed.
●
“
” is displayed at the upper right of the phone number for an incoming international video-phone call.
1
Receiving a Video-phone Call
●
It takes about five seconds to switch. Switching may take a longer time depending on the radio wave conditions.
●
Depending on how the other party’s phone is working or on the radio wave conditions, switching from a video-phone call to voice call may
fail and the connection may be cut off.
●
If you switch between the voice call and video-phone call during a call, the call duration and call charge are counted respectively for the calls.
You are not charged while “Changing” is displayed.
●
You cannot switch between the video-phone call and voice call unless “Indicate V-phone” is set to “Activate” at the other end.
See page 88 for “Indicate V-phone”.
●
Hands-free is not released even if you switch from the video-phone call to voice call during Hands-free.
You cannot set Hands-free ON/OFF while the display for “Changing” is displayed.
●
An alarm for “Quality alarm” and “Reconnect control” does not sound during switching.
●
See page 53 for switching from a voice call to video-phone call.
Information
During a video-phone call
(
) CHG to phone call YES
●
To cancel, select “NO” and press
. The video-phone call returns.
●
While switching, the “Changing” display appears and the voice guidance to that effect is played back.
1
You (caller) can switch from a video-phone call to a voice call during a call.
When the other party’s phone has a function to switch between the calls, you can switch from the video-
phone call to voice call by selecting “CHG to phone call” from the Function menu.
(901iS series only supported, as of May 2005)
Switching from a Video-phone Call to Voice Call
