519
Entering
Characters
Enter hiragana.
3
Use
to fix the character.
5
Use
to convert the character.
●
If you cannot convert the character to the target one, press
to highlight the character you want to convert and press
a few times until the target character appears.
Take “
゛
” or “
゜
” off the character or change the reading (Chinese reading/Japanese reading) and reenter.
●
Repeat pressing
to display the Conversion Candidate List; then you can select the target character.
●
To fix the character as is without converting, press
; without pressing
.
●
When you have fixed the character, the next character will be highlighted.
4
<Mode 1>
た →
Press once
and
once.
だ →
Press once
and once.
の →
Press five
times.
は →
Press once.
な →
Press once.
●
To enter the characters on the same key, press
or press and hold the same key again for at least one second to enter
the next character.
●
To switch between uppercase and lowercase, first enter the character and press
.
<Mode 2>
た →
だ →
,
の →
は →
な →
●
If you fix with only one digit entered, that character is deleted. Enter two digits.
<Mode 3>
た →
だ →
の →
は →
な →
Set
→
