269
Inbox List/Detailed Received Mail display
(
) Reply or Reply with quote
●
You can reply also by pressing
(
) from the detailed Received Mail display.
●
If other recipients of the simultaneous mail are found, you can choose whether to reply to the sender only or to all addresses.
Select “To sender” or “To all” and press
.
1
Enter the subject and text and send.
When you have selected i-mode mail, go to step 2 on page 245.
When you have selected an SMS message, go to step 2 of “Composing SMS (Short Messages) to Send” on page 312.
After you send mail, “
” changes to “
”.
2
You can reply to the sender of i-mode mail and SMS messages. With “Reply with quote”, you can quote the
original text in your received i-mode mail and reply it. You cannot use “Reply with quote” for SMS messages.
Replying to Received i-mode Mail
You can select items to be checked from among i-mode mail, Messages R (Request) and Messages F
(Free), for when you perform “Check new message”.
Connection setting Set check new message
Put a check mark for the items to be checked
(
)
●
“
” and “
” switch each time you press
.
1
●
At purchase, all the items are selected; “
Mail”, “
MessageR”, and “
MessageF”. If you do not want to receive
Messages R (Request) and Messages F (Free), change these settings to “
”.
Information
i-mode Checking
Setting at purchase
All checked
Reply/Reply with Quote
Inbox List/Detailed Received Mail display
(
) Reply with ref
●
If other recipients of the simultaneous mail are found, you can choose whether to reply to the sender only or to all addresses.
Select “To sender” or “To all” and press
.
1
Enter the subject and send.
Go to step 3 on page 245.
After you send mail, “
” changes to “
”.
3
You can display the Mail Text Entry display at the upper part of the display and the detailed Received
Mail display at the lower part of the display so that you can enter the main text by referring to the
received mail. You cannot use “Reply with ref” for SMS messages.
Reply with Reference
Enter the text
●
Each time you press
, you can switch between operations for the Message Entry display and the detailed Received
Mail display.
You can switch the operations also by pressing
(
) to select “Switch messages” and pressing
.
●
Press and hold
for at least one second to display the preview for the main text.
Press
(
) or
to close the preview display and return to the original display.
●
To bring up the whole Mail Text Entry display, press
(
), select “Full/Separate disp”, and press
.
If you operate this again, the detailed Received Mail display appears at the lower part of the display.
2
