SL1100 Multi-Line Terminal
Quick User Guide
For additional information search for “NEC SL1100 Multi-Line Terminal User Guide” in your web
browser
MAKING A CALL
Lift the Handset or press
Speaker
(For the
remainder of this guide we will refer to lifting the
handset but pressing the
Speaker
key is also valid)
•
Dial the required internal number
•
For external calls, dial
0
first for an outside
line
HOLD
Ask the caller to please hold:
•
Press
Hold
- hold key flashes.
•
You may replace handset if you wish.
To retrieve a call:
•
Lift the handset.
•
Press the
Flashing Line Key
TRANSFER
With a call in progress:
•
Press
Transfer
•
Dial an extension, external number or
programmed one-touch key and announce
the call when they answer (optional)
•
Replace the handset
Note:
If the called extension is busy or does not
answer, press the
Green
Flashing Key
to return
to your caller. If the extension answers and
indicates that they do not wish to take the call,
ask them to hang up and you will be put directly
back to the original caller.
REDIAL
Last dialed number
•
Lift the handset and press
#5
to initiate the
call
Recently dialed numbers
•
Without lifting handset press
Redial
(Right
Cursor key).
•
Press the Cursor button up or down to
search for the required number
•
Lift the handset to initiate the call
CONFERENCE
With a call in progress (internal or external)
•
Press the
More
soft key and then the
Conf
soft key
•
Dial an internal or external number
•
When the third party answers, press the
Add
soft key
Repeat the above 3 steps until all parties
are in the conference.
Then press the
Begin
soft key to begin the conference
Note:
Any party may exit the conference by
hanging up. As long as at least one of the
parties is an extension on the phone system the
conference will remain active.
