Digimerge DH200+R Series, Instruction Manual

Page: 45 / 176

33
Setting up Motion Recording
Triggering cameras to record during Video Loss
If video loss occurs, the system can trigger secondary cameras to begin recording as an event.
For example, if a vandal attempts to cut the camera wiring, as soon as the cable wire is cut, the
system triggers other cameras to detect as a motion event.
1. Under the DAY EVENT or NIGHT EVENT tab, click ( ) beside the channel that you wish to
configure.
Event Edit icon
2. Under VLOSS, ensure that whatever channel you are configuring is selected. In this example,
Camera 1 is selected.
Select camera 1 and 2
Example
Select cameras 2 and 3.
3. Click ENTER
(
) to save your settings.
Final Result
When video loss occurs on cameras 2 or 3, camera 1 begins recording as an event.