Digimerge DH200+R Series, Instruction Manual

Page: 158 / 176

146
Appendix F: Connecting Additional External Monitors
APPENDIX F: CONNECTING ADDITIONAL
EXTERNAL MONITORS
Use the Video port (BNC) on the rear panel of the system to use the Monitor Out function. Monitor
Out displays the exact on-screen display of the system.
Use the Spot port (BNC) to use the Spot Out function. Spot Out displays connected cameras on the
system.
NOTE: A BNC-to-RCA adapter (not included) is required to connect a monitor with RCA inputs.
Monitor
(not included)
Spot Monitor
(not included)
To use spot out functions:
1. With a spot monitor connected, press the
SPOT OUT
button on the remote control or Virtual
Remote followed by the numeric button for the channel you wish to view (full-screen).
2. Press the
SPOT OUT
button twice to begin Auto Sequence (by default, Spot Out on the system
is set to Auto Sequence).
When an alarm is triggered, Spot Out will display the triggered channel in full-screen.