Digimerge DH200+R Series, Instruction Manual

Page: 21 / 176

9
Using the System
USING THE SYSTEM
To power the system ON:
1. Connect the power cable to the port on the rear panel.
2. Press the
POWER
button on the front panel or remote control.
To power the system OFF:
1. Press the Record button (

) on the front panel to halt system recording.
2. Enter your system password.
3. Press the
POWER button on the front panel or remote control.
4. Enter your system password to shut down the system.
Password
The default system password is 000000 . You can configure the system password through the Main
Menu>System>ACCOUNTS . For complete information on changing your password and
managing users on the system, see “ACCOUNT” on page 50.
System
Password Field
The default system password is 000000