31
Setting up Motion Recording
•
MODE
: Click the
+/-
buttons to change to apply DAY recording, or NO REC to disable recording.
If you configured DAY recording in Step 1, select DAY.
NOTE:
You cannot configure NIGHT recording to have a beginning and end time. However, if
NIGHT recording is chosen, the NIGHT recording parameters apply to sections of the schedule
that are not included in DAY or NO REC.
•
BEGIN
: Enter the time you want the scheduled recording to start.
•
END
: Enter the time you want the scheduled recording to end.
4. Click
ENTER
(
)
to save your settings.
Final Result
When the camera detects motion, the (
) symbol appears, and the channel number turns red
(
). The channel number turns red to indicate alarm recording. During video search, motion
events will appear as EVENT. If the channel number does not turn red, then motion recording has
not been enabled.
The green motion
icon and red channel
icon indicates that
the channel is set up
for motion recording.
Double-check to see that you have enabled motion recording in Step 1.
Summary of Contents for DH200+R Series
Page 12: ...xii...
Page 119: ...107 iSMS Client Remote Viewing on the Mac PTZ Controls cont d...
Page 174: ......
Page 175: ......
