25
Search
External Search
External search allows you to search for video footage stored on an external device such as an
external hard drive. Note that the DVR can only search for video that is from the same model DVR.
Prerequisites
:
• A USB 2.0 hard drive with data backed up from the same model DVR.
To perform an External Search:
1. Connect a external USB hard drive to the USB port on the front or rear panel of the system.
2. Right-click to open the virtual remote, and then click
.
3. Enter your system password if required.
4. In the EXTERNAL SEARCH menu, click
-/+
and select the external device that you wish to
search.
5. Press the
ENTER
(
)
button. The system scans the external hard drive.
6. The Time Search menu appears. Perform a search to search for videos on your external hard
drive.
Event Source Search
Event Source search allows you to search for video on channels that have an alarm, motion, or
video loss event.
To perform an Event Source search:
1. Press the
Search
button (
) on the front panel or (
) on the virtual remote.
2. Click on the date that you wish to search for. Right-click to open the Virtual Remote. Click the
+
button to select the hour. After you have selected the hour, click the
+
button again to select
the desired minute you wish to search under.
3. Click the
Event Select
button.
4. Under SEARCH MODE, click -/+ and select
EVENT SOURCE
.
5. Under Event Status, configure the following:
•
ALARM:
Select the alarm input you wish to search (input 1~4)
•
MOTION:
Select the channel that you wish to search for motion (channels 1~16)
•
VLOSS:
Select the channel that you wish to search for Video Loss (channels 1~16)
6. Press
MENU
to begin the search.
Summary of Contents for DH200+R Series
Page 12: ...xii...
Page 119: ...107 iSMS Client Remote Viewing on the Mac PTZ Controls cont d...
Page 174: ......
Page 175: ......
