Digimerge DH200+R Series, Instruction Manual

Page: 162 / 176

150
Appendix H: Replacing the Hard Drive
Formatting the Hard Drive
To format the hard disk:
1. Press the MENU button on the front panel of the system.
2. Click DISK>RECORDING DISK .
RECORDING DISK
3. Beside the hard drive you wish to format, click the REMOVE button.
REMOVE button
4. When the system prompts if you want to remove the disk, click YES .
5. Click the DISK MANAGER tab.
6. Select the hard drive you wish to format under DEVICE.
7. Beside ACTION, select ASSIGN TO RECORD DISK .
8. Click the START button. The system begins to format the hard drive.
ATTENTION
: Formatting the HDD erases all data on the hard disk. This step cannot
be undone
. System settings will not be erased.