Digimerge DH200+R Series Instruction Manual Download Page 102

Page: 102 / 176

CMS-DH Central Management Software

Upgrading the Firmware Remotely

Prerequisite

• Ensure the DVRs are online.

• Download the firmware from

www.digimerge.com

, and extract the firmware file.

To upgrade the DVR firmware using CMS-DH:

1. Right-click on the DVR that you wish to upgrade the firmware.
2. Click on

Control>DVR Setup>Update.

3. Under Image File, click the browse button (

). Locate the firmware file and then click

Open.

NOTE:

The firmware file ends in a .IMG extension.

4. Click

Start

to upgrade the system firmware. Wait for the system prompt before you close the

window.

NOTE:

Do not exit CMS-DH during the firmware upgrade process. Doing so may corrupt the DVR.

Summary of Contents for DH200+R Series
















































































































































































Search results

Summary of Contents for DH200+R Series

Reviews:

Related manuals for DH200+R Series

Brands by name

Popular brands

Digimerge DH200+R Series, Instruction Manual

Search results

Summary of Contents for DH200+R Series

Reviews:

Related manuals for DH200+R Series

Brands by name

Popular brands