Digimerge DH200+R Series Instruction Manual Download Page 104

Page: 104 / 176

CMS-DH Central Management Software

•

Parameter:

Select the desired alert sound you want the computer to play.

5. Click

Apply

and then

to save your settings.

6. Under Alarm Output, right-click the light bulb icon, and click

Control

7. Click

Alarm Output On

Alarm Output Off

. This depends on your device type (N/O or N/C).

8. Click

Apply

and then

to save your settings.

When an alarm is triggered, the system will play a sound on the computer.

Configuring Alarm Output

To configure the alarm output type:

1. Under Alarm Output, right-click the light bulb icon, and click

Control

2. Click

Alarm output on

to enable the alarm out device, or

Alarm output off

to disable the

alarm out device

Click here to configure the Command
and Parameter settings

Summary of Contents for DH200+R Series
















































































































































































Search results

Summary of Contents for DH200+R Series

Reviews:

Related manuals for DH200+R Series

Brands by name

Popular brands

Digimerge DH200+R Series, Instruction Manual

Search results

Summary of Contents for DH200+R Series

Reviews:

Related manuals for DH200+R Series

Brands by name

Popular brands