16
RECORDING
By default, the system is set to immediately record at startup from connected cameras. This is
called continuous recording. It is highly recommended to keep continuous recording on at all
times.
The system can perform Continuous Recording, Event Recording, and Schedule Recording.
However, the system can only perform one type of recording at a given time.
Continuous Recording
By default, all camera channels are enabled with continuous recording. During Continuous
Recording, the
REC icon
appears in the top left corner of the OSD.
Continuous recording on all channels
• In this example,
Continuous
Recording is on ALL
channels (default)
REC icon
Event Recording
The system includes three modes of event recording:
•
Motion:
The system
only
records when motion is detected by the affected camera
•
Alarm:
The system records when an alarm or sensor is triggered
•
Video Loss:
The system records when a camera is disconnected or suffers video loss. The
system employs a pre-record function to capture video seconds before the video loss occurred
You can customize the recording parameters (video quality, frames-per-second) of Event
Recording in the Record menu. See “RECORD” on page 37.
Summary of Contents for DH200+R Series
Page 12: ...xii...
Page 119: ...107 iSMS Client Remote Viewing on the Mac PTZ Controls cont d...
Page 174: ......
Page 175: ......
