manualshive.com logo in svg

Danfoss VLT AutomationDrive FC 301, Programming Manual, Page: 73 / 722

Share
Download
Danfoss VLT AutomationDrive FC 301 Programming Manual Download Page 73

Parameter 1-10 Motor Construction

Table 69: Parameter 1-10 Motor Construction

1-10 Motor Construction

Default value: [0] Asynchron

Parameter type: Option

Setup: All setups

Conversion index: –

Data type: Uint8

Change during operation: False

Select the motor design type.

N O T I C E

FC 301 allows only selection of induction motors.

Option Name

Description

[0]*

Asynchron

Use for ASM/IM motors.

[1]

PM, non sali-
ent SPM

N O T I C E

This option is only available in FC 302.

Use for SPM motors, surface-mounted magnet. PM motors are divided into 2 groups, with either sur-
face-mounted (SPM)/non-salient magnets or interior-mounted (IPM)/ salient magnets.

[2]

PM, salient
IPM

N O T I C E

This option is only available in FC 302.

Use for IPM motors, interior-mounted magnet. PM motors are divided into 2 groups, with either sur-
face-mounted (SPM)/non-salient magnets or interior-mounted (IPM)/ salient magnets.

[5]

SynRM

Use for SynRM, synchronous reluctance motors.

[6]

PMaSynRM

Use for PMaSynRM, Permanent Magnet assisted synchronous reluctance motors.

Parameter 1-11 Motor Model

Table 70: Parameter 1-11 Motor Model

1-11 Motor Model

Default value: Size related

Parameter type: Option

Setup: All setups

Conversion index: –

Data type: Uint8

Change during operation: False

Automatically sets the factory values for the selected motor. If the default value 

[1] Std. Asynchron

 is used, determine settings man-

ually according to the selection in 

parameter 1-10 Motor Construction

.

N O T I C E

There are no models available for SynRM motors.

AU275636650261en-000101 / 130R0334 | 73

Danfoss A/S © 2022.12

Parameter Descriptions

VLT AutomationDrive FC 301/302

Programming Guide

Summary of Contents for VLT AutomationDrive FC 301



















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments