manualshive.com logo in svg

Danfoss VLT AutomationDrive FC 301, Programming Manual, Page: 538 / 722

Share
Download
Danfoss VLT AutomationDrive FC 301 Programming Manual Download Page 538

Parameter 18-00 Maintenance Log: Item

Table 966: Parameter 18-00 Maintenance Log: Item

18-00 Maintenance Log: Item

Default value: 0

Parameter type: Range, 0 - 255, Array [10]

Setup: All setups

Conversion index: 0

Data type: Uint8

Change during operation: False

Shows the fault code. See the different maintenance items in 

parameter 23-10 Maintenance Item

.

Parameter 18-01 Maintenance Log: Action

Table 967: Parameter 18-01 Maintenance Log: Action

18-01 Maintenance Log: Action

Default value: 0

Parameter type: Range, 0 - 255, Array [10]

Setup: All setups

Conversion index: 0

Data type: Uint8

Change during operation: False

Shows the fault code. See the different maintenance actions in 

parameter 23-11 Maintenance Action

.

Parameter 18-02 Maintenance Log: Time

Table 968: Parameter 18-02 Maintenance Log: Time

18-02 Maintenance Log: Time

Default value: 0 s

Parameter type: Range, 0 - 2147483647 s, Array [10]

Setup: All setups

Conversion index: 0

Data type: Uint32

Change during operation: False

Shows when the logged event occurred. Time is measured in s since last power-up.

Parameter 18-03 Maintenance Log: Date and Time

Table 969: Parameter 18-03 Maintenance Log: Date and Time

18-03 Maintenance Log: Date and Time

Default value: Size related

Parameter type: Range, 0 - 0, Array [10]

Setup: All setups

Conversion index: 0

Data type: TimeOfDay

Change during operation: False

Shows when the logged event occurred.

N O T I C E

This requires that the date and time is programmed in 

parameter 0-70 Date and Time

.

Date format depends on the setting in 

parameter 0-71 Date Format

, while the time format depends on the setting in 

parameter 0-72

Time Format

.

N O T I C E

The drive has no back-up of the clock function. The set date/time resets to default (2000-01-01 00:00) after a power-down unless
a real-time clock module with back-up is installed. In 

parameter 0-79 Clock Fault

, it is possible to program a warning in case the

clock has not been set properly, for example after a power-down. Incorrect setting of the clock affects the time stamps for the
maintenance events.

N O T I C E

When mounting a VLT® Analog I/O MCB 109 option card, a battery back-up of date and time is included.

AU275636650261en-000101 / 130R0334

538 | Danfoss A/S © 2022.12

Parameter Descriptions

VLT AutomationDrive FC 301/302

Programming Guide

Summary of Contents for VLT AutomationDrive FC 301



















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments