Danfoss VLT AutomationDrive FC 301, Programming Manual, Page: 403 / 722

•
•
•
Option Name Description
Target position is reached in touch probe position mode.
[227] Touch activated Touch probe positioning is active. The drive monitors the touch probe sensor input.
[228] Comparator 6
[229] Comparator 7
[230] Comparator 8
[231] Comparator 9
[232] Logic rule 6
[233] Logic rule 7
[234] Logic rule 8
[235] Logic rule 9
[236] SL time-out 8
[237] SL time-out 9
[238] RS flipflop 8
[239] RS flipflop 9
[240] SL digital output A
[241] SL digital output B
[242] SL digital output C
[243] SL digital output D
[244] SL digital output E
[245] SL digital output F
Parameter 13-41 Logic Rule Operator 1
Table 682: Parameter 13-41 Logic Rule Operator 1
13-41 Logic Rule Operator 1
Default value: Size related Parameter type: Option, Array [10] Setup: 2 setups
Conversion index: - Data type: Uint8 Change during operation: True
Select the 1
st
logical operator to use on the boolean inputs from parameter 13-40 Logic Rule Boolean 1 and parameter 13-42 Logic
Rule Boolean 2 . Parameter numbers in square brackets stand for the boolean inputs of parameters in parameter group 13-** Smart
Logic Control .
Option Name Description
[0] DISABLED Ignores
Parameter 13-42 Logic Rule Boolean 2.
Parameter 13-43 Logic Rule Operator 2.
Parameter 13-44 Logic Rule Boolean 3.
[1] AND Evaluates the expression [13-40] AND [13-42].
AU275636650261en-000101 / 130R0334 | 403 Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide