Danfoss VLT AutomationDrive FC 301, Programming Manual, Page: 658 / 722

Option Name Description
[28] Brake, no brake war
[29] Brake ready, no fault
[30] Brake fault (IGBT)
[31] Relay 123
[32] Mech brake ctrl
[33] Safe stop active
[35] External interlock
[38] Motor feedback error
[39] Tracking error
[40] Out of ref range
[41] Below reference, low
[42] Above ref, high
[43] Extended PID Limit
[45] Bus ctrl.
[46] Bus ctrl, 1 if timeout
[47] Bus ctrl, 0 if timeout
[50] On reference
[51] MCO controlled
[59] Remote, enable, no TW
[60] Comparator 0
[61] Comparator 1
[62] Comparator 2
[63] Comparator 3
[64] Comparator 4
[65] Comparator 5
[66] Comparator 6
[67] Comparator 7
[68] Comparator 8
[69] Comparator 9
[70] Logic rule 0
[71] Logic rule 1
[72] Logic rule 2
AU275636650261en-000101 / 130R0334 658 | Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide