manualshive.com logo in svg

Danfoss VLT AutomationDrive FC 301, Programming Manual, Page: 56 / 722

Share
Download
Danfoss VLT AutomationDrive FC 301 Programming Manual Download Page 56

Parameter 0-45 [Drive Bypass] Key on LCP

Table 33: Parameter 0-45 [Drive Bypass] Key on LCP

0-45 [Drive Bypass] Key on LCP

Default value: [1] Enabled

Parameter type: Option

Setup: All setups

Conversion index: –

Data type: Uint8

Change during operation: True

Press [Off] and select 

[0] Disabled

 to avoid unintended stop of the drive. Press [Off] and select 

[2] Password

 to avoid unauthorized

bypass of the drive. If 

parameter 0-45 [Drive Bypass] Key on LCP

 is included in the Quick Menu, define the password in 

parameter 0-65

Personal Menu Password

.

Option

Name

Description

[0]

Disabled

Disables the key.

[1]*

Enabled

[2]

Password

5.1.6 0-5* Copy/Save

Copy parameters from and to the LCP. Use these parameters for saving and copying setups from 1 drive to another.

Parameter 0-50 LCP Copy

Table 34: Parameter 0-50 LCP Copy

0-50 LCP Copy

Default value: [0] No copy

Parameter type: Option

Setup: All setups

Conversion index: –

Data type: Uint8

Change during operation: False

N O T I C E

This parameter cannot be adjusted while the motor is running.

Option Name

Description

[0]*

No copy

[1]

All to LCP

Copies all parameters in all setups from the drive memory to the LCP memory.

[2]

All from LCP

Copies all parameters in all setups from the LCP memory to the drive memory.

[3]

Size indep. from LCP

Copy only the parameters that are independent of the motor size. This selection can be used
to program several drives with the same function without disturbing motor data.

[4]

File from MCO to LCP

[5]

File from LCP to MCO

[6]

Data from DYN to LCP

[7]

Data from LCP to DYN

[9]

Safety Par. from LCP

[10]

Delete LCP copy data

Use to delete the copy after the transfer is complete.

AU275636650261en-000101 / 130R0334

56 | Danfoss A/S © 2022.12

Parameter Descriptions

VLT AutomationDrive FC 301/302

Programming Guide

Summary of Contents for VLT AutomationDrive FC 301



















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments