BECKWITH ELECTRIC M-6280A, Instruction Book

Page: 449 / 462

D–2
M-6280 Instruction Book
2300 ERROR_DAT_REC_CURRUPT
Error code indicates that data logging record is
corrupted (this error code appears when data log
records are being retrieved via communication or
being saved to sd card).
2301 ERROR_DAT_REC_STORE
Error code indicates that verification of data log
record stored in flash has failed.
2302 ERROR_DAT_REC_BUFF_OVERFLOW
Error code indicates that temporary data log buffer
allocated in ram is full and no more records can be
saved.
2351 ERROR_SOE_REC_STORE
Error code indicates that verification of SOE record
stored in flash has failed.
2352 ERROR_SOE_RECSIZE_UNDEF
Error code indicates that number of SOE events per
flash page is not defined (error appears immedi -
ately during boot up process if code is not properly
configured).
2353 ERROR_SOE_TEMPREC_ERROR
SOE temp buffer is not big enough (error appears
immediately during boot up process if code is not
properly configured).
2354 ERROR_SOE_REC_PER_PAGE_ER-
ROR
Incorrect number of SOE events per flash page (error
appears immediately during boot up process if code
is not properly configured).
2355 ERROR_SOE_RECSIZE_ERROR
Not enough space to store temp SOE events in one
page (error appears immediately during boot up
process if code is not properly configured).
2356 ERROR_SOE_TOTLEN_ERROR
Not enough space to store all the events in the flash
section allocated for SOE storage (error appears
immediately during boot up process if code is not
properly configured).
2401 ERROR_FLASH_WRONG_PG_SIZE
Flash page size in the configuration table is not valid
(error appears immediately during boot up process
if code is not properly configured).
2402 ERROR_FLASH_ACCESS_TIMEOUT
The response for get flash id command was never
received (error appears immediately during boot up
process if code is not properly configured).
2403 ERROR_FLASH_CFG_MISSING
Flash chip installed on the board is not supported
in configuration table (error appears immediately
during boot up process if code is not properly con -
figured).
2404 ERROR_FLASH_WRONG_CFG_FLG
Flash configuration flag is not valid (error appears
immediately during boot up process if code is not
properly configured).
2405 ERROR_FLASH_SECTION_MISSING
The requested flash section ID is not defined in
the configuration table (error appears immediately
during boot up process if code is not properly con -
figured).
2406 ERROR_FLASH_SECTION_RANGE
The requested read/write address in particular sec -
tion of flash is exceeding the section’s size.
2407 ERROR_FLASH_SECTION_OUT_OF_
MEM
Not enough space for particular section in the flash
configuration table (error appears immediately
during boot up process if code is not properly con -
figured).
2408 ERROR_FLASH_CONFIG
Error occurs during firmware update if the program
flash is not set to 1024 bytes.
2409 ERROR_FLASH_OUT_OF_MEMORY
Error occurs during firmware update if there is not
enough space in RAM for firmware storage.