BECKWITH ELECTRIC M-6280A, Instruction Book

Page: 415 / 462

B–14
M-6280A Instruction Book
Setpoints (Cont.'d)

NOTE: [ ] Default Setting
Figure B‑2 Setpoints Record Form (10 of 27)
Setpoint Profile 3
AUTO/REMOTE CONTROL
Auto Control Mode (Voltage)
o
Enable Voltage Control [Enable Voltage Control]
o
Enable VAr Control
o
Enable Current Control
o
Classic [Classic]
o
Auto Adaptive
Classic Voltage Control
Control Open Voltage 95.0 to 140.0 (V) [126.0] ( _____________ )
Control Close Voltage 95.0 to 140.0 (V) [114.0] ( _____________ )
Close Definite Time 0 to 600 (Sec) [60] ( _____________ )
Open Definite Time 0 to 600 (Sec) [60] ( _____________ )
Time Delay Selection
o
Definite Time [Definite Time]
o
Inverse Time
Basic Timer Type
o
Integrating
o
Instant Reset [Instant Reset]
Auto Adaptive Voltage Control
o
Fixed
o
Average [Average]
Fixed
Band Center 100.0 to 135.0 (V) [120.0] ( _____________ )
Band Width (Multiple of Delta V) 1.0 to 2.0 (V) [1.0] ( _____________ )
Close Inverse Time 60 to 3600 (Sec) [3600] ( _____________ )
Open Inverse Time 60 to 3600 (Sec) [3600] ( _____________ )
Average
Band Width (Multiple of Delta V) 1.0 to 2.0 (V) [1.0] ( _____________ )
Close Inverse Time 60 to 3600 (Sec) [3600] ( _____________ )
Open Inverse Time 60 to 3600 (Sec) [3600] ( _____________ )