manualshive.com logo in svg

BECKWITH ELECTRIC M-6280A, Instruction Book

Share
Download
BECKWITH ELECTRIC M-6280A Instruction Book Download Page 135

3–12

M‑6280A Instruction Book

3.10  Overview of Operation

The CapTalk

®

 S-6280 Communications Software 

can be used to successfully communicate settings 

and operational commands to the M-6280A as 

well as access the extensive monitoring and status 

reporting features. Figure 3-11, represents the 

CapTalk Main Screen menu structure. CapTalk Main 

Screen "File Mode" menu structure and CapTalk 

Main Screen "Connected" menu structure are 

presented in Figures 3-12 and 3-13 respectively. 

This section provides a general description of each 

CapTalk menu selection and command in the same 

order as they are displayed in the software program. 

Those CapTalk features and functions that are 

covered in other sections of this Instruction Book 

will be noted and referenced.

Figure 3‑11  CapTalk Main Screen Menu Selections

The CapTalk

®

 Main Screen Connected (Figure 3‑13) 

also displays the type of connection that is in effect 

(top of menu bar), and on the bottom menu bar the 

Control Time, Firmware Version, Connection Status, 

and Setpoint Profile Active.

When in File Mode with a named file open, the file 

name and path to the file are displayed in the top 

menu bar. Also displayed is the Active Profile in the 

bottom menu bar.

Summary of Contents for M-6280A















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands