BECKWITH ELECTRIC M-6280A, Instruction Book

Page: 112 / 462

2–53
Operation – 2
Delta Current Reset (HMI)
This feature allows the user to reset the Delta
Current value to zero.
To reset Delta Current Value proceed as follows:
1. Press the "ENT" (UTIL Hot Button)
pushbutton to awaken the unit. The
menu will advance to "UTILITIES".
UTILITIES
W
COMM MNTR
V
2. Press the Down Arrow pushbutton once.
The unit will display the following:
Calibration/Test
W V
3. Press the Down Arrow pushbutton as
necessary to navigate to the "Reset
Delta Current" screen.
Reset Delta Current
Press ENT to begin
4. Press the "ENT" pushbutton. The Level
Access prompt will be displayed.
ENTER LEVEL ACCESS
_

NOTE: When entering the Level Access code
the display will automatically advance
the cursor to the next digit when input
is momentarily paused.
5. Enter the Level Access code, then press
the "ENT" pushbutton.
If a valid Level Access code was
entered the display will briefly flash a
confirmation screen, then the following
screen will be displayed. If not, reenter
a valid Level Access Code.
Confirm press ENT
Cancel press EXIT
6. Press the "ENT" pushbutton. The
following will be displayed:
Reset Successful
Any key to continue
Delta Current Reset (CapTalk
®
)
This feature allows the user to reset the Delta
Current value to a default value of "zero".
To reset the Delta Current from CapTalk perform
the following:
1. Select Setup/Reset Delta Current from
the CapTalk toolbar. CapTalk will display
the Reset Delta Current dialog screen
Figure 2-44.
Figure 2‑44 Reset Delta Current Confirmation
Dialog Screen
2. Select "Yes". CapTalk will display a
"Delta Current cleared successfully"
confirmation screen Figure 2-45.
Figure 2‑45 Delta Current Cleared Successfully
Dialog Screen
3. Select "OK". CapTalk will return to the
Main Screen.