BECKWITH ELECTRIC M-6280A, Instruction Book

Page: 108 / 462

2–49
Operation – 2

NOTE: When entering the Level Access code
the display will automatically advance
the cursor to the next digit when input
is momentarily paused.
6. Enter the Level Access code, then press
the ENT pushbutton.
If a valid Level Access code was entered,
then the display will briefly flash a
confirmation screen, then a "C". If not,
reenter a valid code.
Phase Shift Comp.
X.X C
7. At the cursor, input the desired Phase
Shift Compensation value utilizing the
arrow pushbuttons, then press the ENT
pushbutton. The display will return to the
"Phase Shift Compensation" screen with
the entered value.
Watchdog Resets and Power Resets
This feature provides the user with the ability to
determine the number of processor resets that have
occurred and also the number of power cycles to
the control has experienced. Both counters can be
reset by the user.
To clear the Watchdog reset and Power Cycle
counters proceed as follows:
1. Press the ENT (UTIL Hot Button)
pushbutton to awaken the unit. The
menu will advance to "UTILITIES".
UTILITIES
W
COMM MNTR
V
2. Press the Down Arrow pushbutton once.
The unit will display the following:
Calibration/Test
W V
3. Press the Down Arrow pushbutton as
necessary to navigate to the "Clear
Reset Counters" screen.
Clear reset counters
Press ENT to begin
4. Press the "ENT" pushbutton. The
following will be displayed:
Confirm press ENTER
Cancel press EXIT.
5. Press "ENT". the control will display a
"Counters Reset" screen.
Counters Reset
then return to the following:
Confirm press ENTER
Cancel press EXIT.