BECKWITH ELECTRIC M-6280A, Instruction Book

Page: 195 / 462

M-6280A Instruction Book
4–4
TEMPERATURE UNITS ..............................
4–87
Setting the Temperature Units
From the HMI .......................................... 4–87
Setting the Temperature Units
From CapTalk .......................................... 4–88
DATA LOGGING ......................................... 4–89
Data Logging Setup From The HMI ......... 4–89
Data Logging Setup From CapTalk ......... 4–90
POWER UP OPEN COMMAND .................. 4–91
Setting the Power Up Open Command
From The HMI .............................................. 4–91
Setting the Control Power Up Open
Command From CapTalk ............................. 4–91
Delta Voltage Overview ............................... 4–92
Overview of Auto/Remote Limits and Auto
Control Setting Time Delay Implementation
... 4–93
CAPACITOR BANK SWITCH STATUS ....... 4–95
Bank/Switch Failed Measured Current Level 1
Or Level 2 Enabled ...................................... 4–96
Bank/Switch Failed Measured Current Level 1
And Level 2 Enabled .................................... 4–96
Bank Switch Failed Level 1 .......................... 4–99
Enabling/Disabling and Setting Bank/Switch
Failed Level 2 Settings from The HMI
.......... 4–99
Enabling/Disabling and Setting Bank/Switch
Failed Level 1 Setting from The HMI
.......... 4–103
Enabling/Disabling and Setting Bank Status
From The HMI
............................................ 4–104
Enabling/Disabling Bank/Switch Detect
From The HMI ............................................ 4–107
Enabling/Disabling Bank/Switch Status,
Bank/Switch Failed Level 1 and 2 and Bank
Switch Status From CapTalk ...................... 4–108
CBEMA FUNCTIONALITY ....................... 4–110
PHASE OVERCURRENT .......................... 4–111
Setting Phase Overcurrent From
The HMI ..................................................... 4–111
Setting Phase Overcurrent From
CapTalk ...................................................... 4–112
4.3 SYSTEM SETPOINTS
...............
4–113
SETTINGS PROFILES AND PROFILE
TRIGGERING ............................................ 4–113
Settings Profiles ......................................... 4–113
Profile Triggers ........................................... 4–113
SCADA Profile Trigger ............................... 4–113
Season Profile Trigger ............................... 4–113
Above and Below Temperature Profile
Trigger ........................................................ 4–115
Reverse Power Profile Trigger ................... 4–115
Manual Profile Switching Interactions ........ 4–115
Default Values ............................................ 4–115
Setting the Active Setpoint Profile
from the HMI .............................................. 4–116
Setting the Active Setpoint Profile
from CapTalk ............................................. 4–117
EDITING SETPOINT PROFILES .............. 4–117
Selecting a Setpoing Profile for Editing
from the HMI .............................................. 4–117
Selecting a Setpoing Profile for Editing
from CapTalk ............................................. 4–119
Configuring Settings Profile Triggers ......... 4–124
AUTO CONTROL MODE SETTINGS ....... 4–125
Fixed or Average Option ........................ 4–125
Bandcenter ............................................ 4–125
Bandwidth Multiplier .............................. 4–125
Resultant Bandwidth ............................. 4–125
Timing ................................................... 4–126
Open and Close Voltage Rails............... 4–126
Time Override ....................................... 4–126
Temperature Override ........................... 4–126