Balluff BVS ID-M1280 F1 Series, Configuration Manual

Page: 255 / 316

BVS ID-M1280xF1-xx-xxx
english 97
4.3.5.4 Set Inputs
Reference values can be sent via the control to the BVS ID to which the codes found are compared. The format
of these reference values is defined in the SensorApp. Depending on the size of the defined data packet,
toggling may be necessary, i.e. several data blocks are transmitted one after the other.
Command:
Sub address Data Meaning
n+00 0x02 1st bit string (Job Start)
n+01 0x04 Set reference values
n+02 User data length byte 0
n+03 User data length byte 1
n+04 Input byte 0
n+05 Input byte 1
n+06 Input byte 2
n+07 Input byte 3
…
n+31 0x02 2nd bit string
Response:
Sub address Data Meaning
n+00 Status byte
n+01 Error byte
n+02 0x02 1st bit string (Job Start)
n+03
CMD status:
0x00 Command was executed successfully.
0x16
The application is currently in a state where requests cannot be processed (Not-Ready
status).
n+04
n+05
…
n+31 0x02 2nd bit string