Balluff BVS ID-M1280 F1 Series, Configuration Manual

Page: 246 / 316

BVS ID-M1280xF1-xx-xxx
88 english
4.3.3.4 Output buffer
Byte address
Bit
7 6 5 4 3 2 1 0
n+0
1st bit string
- TI - - - Reset Error Trigger Job
n+1
Status byte
Command identification
n+2
Error byte
Data length byte 0 or data
n+3 Data length byte 1 or data
n+4 Data
n+5 Data
n+6 Data
n+7 Data
n+8 Data
n+9 Data
... Data
n+31
2nd bit string
- TI - - - Reset Error Trigger Job
This output buffer is used by the PLC and read by the BVS ID .
Description of the individual signals
Bit String
Bit number Name Functional description
0 Job
0: No new job is available.
1: A new job is present.
1 Trigger
Triggers a trigger signal in the BVS ID is triggered. Is acknowledged by the Waiting For Trigger bit
is reset.
2 Reset Error Resets the error bit. After resetting the bit, new buffered errors may be set.
3 Not used
4 Not used
5 Not used
6 TI A state change during a job indicates that the PLC is ready to receive further data from the BVS ID.
7 Not used