Balluff BVS ID-M1280 F1 Series, Configuration Manual

Page: 212 / 316

BVS ID-M1280xF1-xx-xxx
54 english
Example 2:
Status message from BVS ID to the client : 12 00 02 00 20 01
The status word 20 01 can be interpreted as: 0b 0010 0000 0000 0001. The 5th of the low byte and the 0th bit
of the high byte (i.e. the 8th bit) are binary "1".
Therefore, the status message indicates Ready and Trigger Error .
NOTE
If the Ready bit is not set (binary "0") the error bits Input Data Error , Report Error and Trigger Overflow
are automatically set to binary "0" and are no longer changed. Those errors are accordingly not
reported by a status message in configuration mode. However, in case of a fatal system error, a status
message with the error bit
System Error is sent despite ready being binary "0". The other status bits
Waiting For Trigger and Simulation Mode also change their value in configuration mode and these
changes are reported by a status message.
