Balluff BVS ID-M1280 F1 Series, Configuration Manual

Page: 296 / 316

BVS ID-M1280xF1-xx-xxx
138 english
•
•
•
•
•
Vibration Alarm Threshold
Threshold value of the vibration for triggering an event. The comparison is performed for each axis and variable
with logical OR-link.
The hysteresis is fixed and is based on time (not on amplitude). If the vibration value exceeds the threshold value
for 50 ms, the alarm is activated.
Objective: debouncing and avoidance of shock values.
Unit: [mm/s]
Minimum value: 0,0
Maximum value: 1770,0
Vibration Alarm Status
The status flag is TRUE if the vibration exceeds the alarm threshold value.
0 = no alarm
255 = alarm
Events
Event
Code
Event Type Event – Description – Remedy Device Status
0x8CD1
(36049)
Warning
Vibration alarm
→
Check machine.
0 – Device is operating properly.
This event indicates that the measured vibration value (v-RMS) exceeds the specified threshold value. The
machine should be inspected since the vibration value is above the normal value. The status of the
BVS ID itself
is OK, it is functioning properly.
The higher vibration is caused outside of the BVS ID . The primary goal is the detection of trends, changes to
the vibration alarm value (see figure above yellow line).