Balluff BVS ID-M1280 F1 Series, Configuration Manual

Page: 308 / 316

BVS ID-M1280xF1-xx-xxx
150 english
Events
With special process data values, the BVS ID automatically checks whether the values are updated in the time
period specified by the BVS ID . If an update timeout is triggered as a result, this is output via the following
diagnosis messages:
Event
Code
Event Type Event – Description – Remedy Device Status
0x1851
(6225)
Notification Process Data Update Timeout – for information purposes only 0 – Device is operating properly.
0x1852
(6226)
Warning
Multiple Process Data Update Timeout – for information
purposes only
0 – Device is operating properly.
If the variant of the BVS ID is changed, the currently set profile is retained.
In the case that the corresponding PD profile is not valid for this variant, the default profile for the corresponding
variant is selected.
Event
Code
Event Type Event – Description – Remedy Device Status
0x1850
(6224)
Notification
Process data profile selection cannot be used – default value is
used.
0 – Device is operating properly.
The selection of the process data profile is dependent on the variant – the PD-profile IDs are assigned to one or
more device variants.
PD Invalid
PD Inputs Invalid:
Input data (device-to-master) is marked as invalid if the device status of the BVS ID is Failure. In all other states,
replacement values for the data are output for which the content cannot be output correctly.
PD Outputs Invalid:
If a master sends the process data without explicitly marking the data as valid by means of master command,
the data is not used in the
BVS ID . The BVS ID operates only with the last valid data.