Balluff BVS ID-M1280 F1 Series, Configuration Manual

Page: 314 / 316

BVS ID-M1280xF1-xx-xxx
156 english
•
•
•
•
•
•
•
•
4.5.3.4 Product Status Signals
Topic Meaning Example
balluff/HOSTNAME/
vision/status
Returns the list of status information
entries defined below.
{
"ready": true,
"deviceLocked": false,
"simulationMode": false,
"triggerOverflow": false,
"waitingForTrigger": true,
"inputDataError": false,
"resultDataError": false,
"reportError": false,
"systemError": false,
}
balluff/HOSTNAME/
vision/status/ready
Is set to false, if BVS ID is currently busy,
and cannot process any messages or
signals at this moment.
{"ready": false}
balluff/HOSTNAME/
vision/status/
deviceLocked
This topic is true if
a PLC is connected to the BVS
ID and
the user management is active,
and
no user is logged in as expert or
admin.
{"deviceLocked": false}
balluff/HOSTNAME/
vision/status/
simulationMode
This topic signals that either the File
Device or the Simulation mode in the
Communication Settings of the System
Settings is active.
{"simulationMode": false}
balluff/HOSTNAME/
vision/status/
triggerOverflow
A trigger was discarded since it was still
busy with the analysis of the previous
image.
{"triggerOverflow": false}
balluff/HOSTNAME/
vision/status/
waitingForTrigger
True if BVS ID is waiting for a trigger
signal.
{"waitingForTrigger": true}
balluff/HOSTNAME/
vision/status/
inputDataError
It is set for input buffer (container)
overflow (more input containers
than inspections, so that one
input container was discarded).
It is set for input buffer (container)
underflow (more inspections than
input containers, so that one
input container was used multiple
times).
{"inputDataError": false}
balluff/HOSTNAME/
vision/status/
resultDataError
This topic becomes true as soon as a
result container was not picked up by the
REST client.
{"resultDataError": false}
balluff/HOSTNAME/
vision/status/reportError
This topic becomes true as soon as a
report file could not be transferred and got
lost.
{"reportError": false}
balluff/HOSTNAME/
vision/status/
systemError
This topic becomes true if
A critical temperature of 90 °C
was exceeded inside the device.
The inspection program could not
be imported. instead, the
standard inspection program is
set.
A critical error occurred while
executing the inspection
program.
{"systemError": false}