Balluff BVS ID-M1280 F1 Series, Configuration Manual

Page: 254 / 316

BVS ID-M1280xF1-xx-xxx
96 english
4.3.5.3 Get Results
After an inspection run, the BVS ID via the Result Data Available -bit that result data are ready to be fetched.
With this command a result packet with the size defined in the SensorApp is fetched from the BVS ID is
fetched. Depending on the size of the defined data packet, toggling may be necessary, i.e. several data blocks
are transmitted one after the other.
Command:
Sub address Data Meaning
n+00 0x02 1st bit string (Job Start)
n+01 0x03 Get Results
n+02
n+03
…
n+31 0x02 2nd bit string
Response:
Sub address Data Meaning
n+00 Status byte
n+01 Error byte
n+02 0x02 1st bit string (Job Start)
n+03
CMD status:
0x03 Command was executed successfully, result data is transmitted.
0x15 No result data available.
n+04 User data length byte 0
n+05 User data length byte 1
n+06 Inspection ID byte 0
n+07 Inspection ID byte 1
n+08 Inspection ID byte 2
n+09 Inspection ID byte 3
n+10 Result byte 0
n+11 Result byte 1
n+12 Result byte 2
… Result byte x
n+31 0x02 2nd bit string