Balluff BVS ID-M1280 F1 Series, Configuration Manual

Page: 299 / 316

BVS ID-M1280xF1-xx-xxx
english 141
4.4.9.11 Device Status and Detailed Device Status
Description
The Device Status feature provides information about the current device status
Each Device Status is combined with a corresponding diagnostic message
It also gives the user the possibility to actively read out currently pending events of the BVS ID .
Process Data
Object ID Name Description Direction
0x002F (47) System Error
This bit is set (TRUE) if there is an error in the BVS ID. This
information is linked to the device status (4-Failure), which can be
triggered by different device functions or diagnostic messages.
The bit is reset as soon as the error status no longer exists
(FALSE).
Input
ISDU
Name Index
Subinde
x
Acces
s
Length Data Type
Data
Storage
Default
Device Status
0x0024
(36)
0 R 1 byte UINT8 n/a -
Detailed Device Status
0x0025
(37)
0 R
30
bytes
UINT8[ ] n/a 0x00 0x00 … 0x00
Device Status
The parameters are accessed via subindex 0. The output values are to be interpreted as follows:
Value Status Description
0 Device is operating properly BVS ID working correctly.
1 Maintenance-Required
Although the process data is valid, internal diagnoses show that the
BVS ID will soon lose its ability to function properly. Maintenance is
necessary.
2 Out-of-Specification
Although the process data is valid, internal diagnoses show that the
BVS ID is operating outside of its specified measurement range or
environmental conditions. The installation must be checked for
unintentional malfunctions.
3 Functional-Check
Process data is temporarily invalid due to intentional changes to the
BVS ID, e.g., parameterization or teaching-in.
4 Failure
Process data is invalid due to a malfunction of th BVS ID or its
peripheral devices. The BVS ID is not able to perform its intended
function. Re-configuration (resetting to factory settings) can help.
Otherwise, Balluff service must be contacted or the BVS ID device
replaced.