Balluff BVS ID-M1280 F1 Series, Configuration Manual

Page: 167 / 316

BVS ID-M1280xF1-xx-xxx
english 9
•
•
•
•
•
1.
2.
3.
2 SensorApp / Webinterface
2.1 Introduction
Normally, the BVS ID is configured via Auto Setup process. However, the operator has the possibility to adjust
the configuration via the web interface ("SensorApp").
to adjust the sensor configuration,
display live images,
view statistics and
Change system settings.
View device states and errors.
Perform the following actions:
Open a web browser.
Enter the following URL:
http://192.168.10.2 .
Confirm the entry.
Depending on the network topology, different network settings are required. Usually, in a company network or in
a production facility, the IP addresses are fixed. In case of connection difficulties, please consult your network
administrator.
NOTE
By default, the IP address of the BVS ID is set to 192.168.10.2. However, you can change this to
DHCP in the system settings.

NOTE
For security reasons, the system administator has to change the initial password (serial number) and
the passwords of each user during the first start of the SensorApp.
