Balluff BVS ID-M1280 F1 Series, Configuration Manual

Page: 198 / 316

BVS ID-M1280xF1-xx-xxx
40 english
Parameter Description Data Type
Default Size
[Bytes]
Total Result The total result of the inspection. Bool 1
Result Message String message which describes details of the inspection run String 60
Code Type 1...n Type of the found code String 20
Code Value 1...n
Read text of the found code - Default Size is set after a successfully finished
Auto Setup.
String 20
Expected Value 1...n Expected text set by the user or received by the control interface String 20
Minimum Quality 1...n Minimum quality description of the found code String 1
Full Quality 1...n Full quality description of the found code String 10
Module Size 1...n Module size of the found code Float 4
Center X 1...n X-position of center point of the found code UINT16 4
Center Y 1...n Y-position of center point of the found code UINT16 4
Rotation 1...n Rotation of the found code UINT16 2
Interpretation of the sent data
The tool sends the data via the communication channel defined in the system settings. To interpret the data
properly its structure, as it is described in chapter
Connection to the customer control system , has to be taken
into account.
NOTE
The string length of the code gets set automatically after a successful Auto Setup. In case the code
length differs from the set length during usage, the biggest possible length has to be set manually.

NOTE
Read Unicode characters contained in matrix codes are represented by the UTF-8 encoding scheme.
UTF-8 is a variable-width character encoding. That is, different Unicode characters are represented by
a varying sequence length from 1 up to 4 elements. Please set the length of the respective output
string(s) accordingly after Auto Setup.

NOTE
More information about its configuration can be found in chapter System menu of the manual.
