Balluff BVS ID-M1280 F1 Series, Configuration Manual

Page: 283 / 316

BVS ID-M1280xF1-xx-xxx
english 125
4.4.9.3 Boot Cycle Counter
Description
After each start, the current Boot Cycle Counter is read from the non-volatile memory, incremented by 1 and
rewritten. In addition, a second Boot Cycle Counter is implemented that can be reset.
The output of the current boot cycle can serve as a control for the service interval as well as for preventative
maintenance. Schedules for regular maintenance can be tied to the values of the Boot Cycle Counter.
Process Data
Object ID Name Description Direction
0x001E (30) Boot Cycle Counter Output of the current Boot Cycle Counter Input
0x001F (31) Custom Boot Cycle Counter Output of the resettable Boot Cycle Counter Input
ISDU
Name Index
Subinde
x
Acces
s
Length Data Type
Data
Storage
Default
Boot Cycle Counter
0x0058
(88)
0 R 8 bytes n/a
Boot Cycle Counter 1 R 4 bytes UINT32 n/a -
Custom Boot Cycle
Counter
2 R 4 bytes UINT32 n/a -
Boot Cycle Counter
This parameter saves the value of the current boot cycle, which is incremented on each start.
Custom Boot Cycle Counter
This parameter saves the value of the current, user-defined counter, which is incremented on each start and
can be
reset via the Maintenance Reset system command.
System Commands
Command Value Device Action
0x81 (129)
Application Reset – Resets the Custom Boot Cycle Counter with ISDU-index 0x58 subindex 2 to the
default value 0.
0x82 (130)
Reset Factory Settings – Resets the Custom Boot Cycle Counter with ISDU-index 0x58 subindex 2 to the
default value 0.
0xA5 (165)
Maintenance Reset – Resets the Custom Boot Cycle Counter with ISDU-index 0x58 subindex 2 to the
default value 0.
NOTE
The maximum counter value that can be saved is 1,000,000 and, with a switch-on and switch-off every
12 minutes, this means a service life of over 20 years.
